Origin: Italy
Size: DN15 DN200
Material: copper, cast iron, steel, plastic
Voltage: 12V, 24V, 110V, 220V
Mounting type: threaded mounting, flange mounting
Valve type: normally closed, normally open
Working temperature: 0 degrees Celsius 200 degrees
Celsius Working Pressure: PN10, PN16, PN25
Working environment: water, oil, gas, steam, gas


Italy solenoid valve is a product composed of stainless steel, copper, cast iron, plastic, this is a product line that uses a 24V, 220V power supply to close and open the valve. The valve is used in clean water, wastewater, gas, oil, steam, corrosive substances such as acids, chemicals,…
Italian solenoid valves are a product line manufactured in large factories in Italy, a country with an outstanding transmission industry, specializing in producing valves with good quality and longterm use. Italy solenoid valves are manufactured with two types of normally closed solenoid valves, normally open solenoid valves.
Italian solenoid valves are a product line with a range of sizes from DN15 DN200 and are installed in the piping system in the form of threaded and flanged installations. This is a product line that we provide throughout the provinces and cities in the country.

Solenoid Valve Structure Italy

Italian solenoid valves have the same structure as other valve lines including parts such as electric coid heads, valve stems, valve shafts, valve discs, gaskets, springs, parts are composed of many different materials such as:
Electrical coid head: is a part with an outer shell made of plastic, stainless steel, this is a part that bears the impact from the outside, for extremely high electrical insulation. Inside there is a coil made of copper wrapped around the magnet, when the power is applied, a magnetic field is generated to lift the valve shaft.
Valve body: is a part composed of stainless steel, copper, cast iron, and plastic materials connecting the two ends of the pipeline in the form of threaded and flanged fittings.
Valve shaft: is the part used to open and close the valve attached to the valve disc and spring. This part is usually made of stainless steel and stainless steel.
Valve discs, gaskets: are attached to the valve pillar when the lifting shaft is raised to the lifting valve disc at that time for the circulation of flows through the pipeline.
Spring: constructed of stainless steel material, with extremely high elastic force, is a part attached to the valve shaft.

Italy solenoid valves are used in a variety of environments such as:

Application: in fire protection system.
Application: in automatic irrigation systems in vegetable gardens, flower gardens, gardens.
Application: in the factory using steam gas, compressed air, petroleum plants.
Application: in food and pharmaceutical systems in wine, beer, soft drink factories.
Application: in solution systems, chemicals of highly corrosive substances such as acids, bases,…


There are no reviews yet.

Be the first to review “ACL SOLENOID VALVE – ITALY”

Your email address will not be published.